108 x 84 curtains


108-x-84-curtains 108 x 84 curtains

108 x 84 curtains – When it comes to home decorating, curtain rods are just as important of a factor as the curtain fabric. Curtain rods can be found in a number of modern, elegant and sleek designs and colors with ornamental styles and knobs which could be matched to match any type of furniture and decor.

The best way to make curtain rods

The first thing to do, and also the most crucial, in regards to hanging drapes or making rods, is to ensure you make precise measurements. You should assess the width of the windows, allowing for a few extra inches on either side. Curtain rods can be made from many materials, including PVC, steel, aluminum or wood. You can purchase various decorations and ornamental knobs to place at the ends of the rod. You can get these at local hardware stores, or even the big box stores such as Home Depot and Lowes. Another creative and crafty idea would be to utilize kitchen hooks as curtain rod holders. These could be inserted by screwing them in above or on the side of these windows, remembering to thread the curtain rings (if needed) before putting the knobs at each end.

Types of curtain rods

Whether you’re deciding to make your brand new curtain rods as a do-it-yourself endeavor, or pick from the a variety of styles available on the market, it’s crucial to understand which kind of curtain rod you will have to match your decor.

  1. One kind, called cafe rods, can be used with or without rings. These are typically used for hand-drawn drapes or tie-tab drapes, and can be found in several different finishes.
  2. Wide curtain rods are mainly used for bay and corner windows because the corner connectors make these convenient for this kind of window.
  3. Sash rods are often used for stretched curtains on doors and also to allow the curtains to hang closer to the glass surface. They attach at the bottom and top.
  4. Narrow curtain rods are often used where the drape fabric is very sheer. Choosing a rod that’s clear or translucent is a fantastic idea for these.

Installation curtain rods

First of all, decide whether you want to mount the curtain rod on the window frame or the wall socket. On consideration here is that often frames are made from oak or alternative high-quality woods, and you may not want to drill into them. Plaster or sheetrock walls are very simple to patch if you alter decor afterwards. To ascertain the proper positioning hold up the rod to the wall with a very long carpenters amount over the rod to make sure you have the rod degree. Also mark the placement of the brackets on the wall or frame using a pencil. When doing this, you may want the drapes mounted on the rod, if there is any question about how they are going to appear, or their hanging span. Normally the brackets are placed three to six inches beyond the border of this window. Next, drill holes across the pencil marks to affix the anchors throughout the bracket, making very sure you’re utilizing the proper bit size. Finally, position the curtain rods into the brackets. If the rod is a bit longer, you may have to install a center bracket to support the rod and the drapes, to prevent sagging. You need to be certain you utilize wall fasteners which will properly support the weight of all the rods and drapes. Most fasteners will specify the weight they can safely support. The last step in installing curtain rods would be to repair the rods and brackets before dressing up the windows with drapes, draperies or valances.

Originally posted 2017-10-04 10:21:30.

Leave a reply "108 x 84 curtains"