b smith curtains – If it comes to home decorating, curtain rods are just as important of a variable as the curtain cloth. Curtain rods are available in a number of modern, elegant and sleek designs and colors with ornamental styles and knobs which can be matched to match any type of decor and furniture.
The best way to make curtain rods
The very first thing to do, and the most critical, in regards to hanging curtains or making rods, is to make certain you make precise measurements. You should measure the diameter of the windows, allowing for a couple of extra inches on either side. You can buy various ornaments and decorative knobs to place in the ends of the rod. You can get these at local hardware stores, or the large box stores like Home Depot and Lowes. Another creative and crafty idea would be to use kitchen hooks as curtain rod holders. These can be inserted by screwing them in over or on the side of these chimney, remembering to thread the curtain rings (if needed) before screwing the knobs at each end.
Types of curtain rods
Whether you are choosing to make your brand new curtain rods as a do-it-yourself project, or pick from the various styles that can be found on the current market, it’s important to understand which kind of curtain rod you will need to match your decor.
- One kind, known as cafe rods, can be employed with or without bands. These are generally used for hand-drawn curtains or tie-tab curtains, and are available in many distinct finishes.
- Wide curtain rods are primarily employed for bay and corner windows because the corner straps make these convenient for this kind of window.
- Sash rods are usually employed for stretched curtains on doors and to enable the curtains to hang closer to the glass surface. They attach in the top and bottom.
- Narrow curtain rods are usually used where the drape cloth is quite sheer. Picking a rod which is clear or translucent is a good idea for them.
Installation curtain rods
First of all, decide whether you want to mount the curtain rod on the window frame or the wall socket. On consideration this is that frequently frames are made from pine or alternative high-quality woods, and you might not want to drill into them. Plaster or sheetrock walls are very simple to patch should you change decor afterwards. To ascertain the proper positioning hold up the rod to the wall using a very long carpenters level over the rod to be certain you have the rod degree. (Very much a two-person task!) Also mark the positioning of the mounts on the wall or frame using a pencil. When doing this, you might want the curtains mounted on the rod, if there’s a question about how they will look, or their dangling span. Usually the mounts are put three to six inches beyond the edge of this window. Next, drill holes across the pen marks to combine the anchors through the bracket, making quite certain you are utilizing the proper bit size. Finally, place the curtain rods into the mounts. If the rod is somewhat longer, you might need to put in a center bracket to support the rod and the curtains, to avoid sagging. You want to make sure you use wall attachments which will properly support the weight of all the rods and curtains. Most fasteners will define the weight that they can safely support. The last step in installing curtain rods would be to repair the brackets and sticks before dressing the windows with curtains, draperies or valances.
Originally posted 2018-01-05 08:22:13.