coastal curtain rods

94 views

coastal-curtain-rods coastal curtain rods

coastal curtain rods – When it comes to home decorating, curtain sticks are equally as significant of a variable as the curtain fabric. Curtain rods are available in many contemporary, elegant and sleek designs and colors with ornamental styles and knobs which can be matched to complement any sort of furniture and decor.

The best way to make curtain rods

The very first thing to do, and also the most crucial, in regards to hanging drapes or making sticks, is to make certain you make accurate measurements. You should assess the width of the windows, allowing for a couple of extra inches on both sides. You can purchase different decorations and ornamental knobs to put at the ends of the rod. Another creative and crafty idea would be to utilize kitchen hooks as curtain rod holders. These can be added by screwing them above or on the side of these chimney, remembering to thread the curtain rings (if desired) before putting the knobs at each end.

Types of curtain sticks

Whether you’re choosing to make your brand new curtain sticks as a do-it-yourself endeavor, or select from the a variety of styles that can be found on the market, it’s crucial to understand which kind of curtain rod you will have to fit your decor.

  1. One kind, known as cafe sticks, can be used with or without rings. These are generally used for hand-drawn drapes or tie-tab drapes, and are available in several distinct finishes.
  2. Wide curtain rods are primarily used for corner and bay windows because the corner connectors make these suitable for this kind of window.
  3. Sash sticks are usually used for stretched curtains on doors and also to enable the curtains to hang closer to the glass surface. They attach at both bottom and top.
  4. Narrow curtain rods are usually used where the curtain fabric is quite sheer. Choosing a rod that’s clear or translucent is a good idea for them.

Installation curtain sticks

First and foremost, choose whether you want to mount the curtain rod on the window frame or the wall. On consideration this is that often frames are made from oak or alternative high-quality woods, and you may not wish to drill into them. Plaster or sheetrock walls are extremely easy to patch if you change decor later. To ascertain the appropriate positioning hold up the rod to the wall using a very long carpenters amount over the rod to make certain you have the rod level. Also mark the positioning of the mounts on the wall or frame with a pencil. When doing this, you may wish the drapes mounted on the rod, if there is any question about how they will appear, or their dangling length. Normally the mounts are placed three to six inches beyond the edge of the window. Then drill holes over the pencil marks to affix the anchors throughout the bracket, making quite certain you’re using the appropriate bit size. Finally, position the curtain sticks into the mounts. If the rod is a bit longer, you may have to put in a centre bracket to support the rod and the drapes, to avoid sagging. You need to make sure you utilize wall fasteners which will correctly support the weight of all the rods and drapes. Most fasteners will specify the weight that they can safely support. The final step in installing curtain rods would be to repair the brackets and sticks before dressing up the windows with drapes, draperies or valances.

Leave a reply "coastal curtain rods"

Author: 
    author