customize your own shower curtain – If you have a shower over a bath tub then you require a shower curtain to protect against the whole bathroom getting wet when you have a shower. Buy a shower curtain in a design you like and which fits the style of your bathroom – frequently shower curtains are the largest colored surface in this small room – so it’s important to get it all right. As Soon as You get your shower curtain house, here is how to hang it properly
Open up the bundle and put the shower curtain out entirely on the ground. Shower curtains often have two components (which you can purchase individually). You may take an outer non-waterproof layer and an inner waterproof liner or perhaps you just have one watertight curtain.
If you have an inner and outer drape both will have eyelets at the top. If you have two components then put out the liner. When there’s a wrong side and a right side subsequently have the right side facing the ground. Then put the outer drape on top with the eyelets at the same end and with the right side facing outwards. That way you will see that the best side on the lining whenever you’re in the shower and the ideal side of the curtain whenever you’re in the restroom!
If you’ve bought shower curtains and lining separately along with the eyelets do not match you up will be better hanging the drapes separately and using a double (dual track) shower rod or rail.
If you have one watertight curtain then just lay it out to the ground.
3. Insert the Rings
You’ll need as many shower curtain rings since there are eyelets in the drapes. Insert them into each eyelet.
4. Hang over the Bathtub
Place the curtain rings onto the shower curtain rod or rail which should be installed according to the manufacturer’s directions. (You do not need the whole thing coming down to you in mid-shower).
The inner lining or solitary shower curtain needs to be set within the tub as you shower to avoid water leaking on the ground.
5. Following Your Shower
As soon as you’ve showered open up the drapes completely – pull them as far as they extent across the length of the rod or rail so they have a chance to dry – this will help prevent mildew.
Originally posted 2017-06-11 00:19:07.