finding nemo bedroom curtains – If it comes to home decorating, curtain sticks are just as significant of a factor as the curtain fabric. Curtain rods are available in many contemporary, elegant and sleek designs and colours with decorative styles and knobs which can be matched to match any sort of furniture and decor.
The first thing to do, and the most critical, when it comes to hanging drapes or making sticks, is to ensure you make accurate measurements. You should assess the width of the windows, allowing for a couple of extra inches on either side. Curtain rods can be made from many materials, including PVC, steel, wood or aluminum. You can buy different ornaments and decorative knobs to place at the ends of the rod. You can get these at local hardware stores, or even the big box stores such as Home Depot and Lowes. Another innovative and crafty idea would be to utilize kitchen hooks as curtain rod holders. These can be added by screwing them in above or on the side of these chimney, remembering to thread the curtain rings (if needed) before screwing the knobs at each end.
Types of curtain sticks
Whether you’re deciding to create your new curtain sticks as a do-it-yourself endeavor, or select from the various styles that can be found on the market, it’s crucial to understand which kind of curtain rod you’ll need to match your decor.
- One kind, called cafe sticks, can be used with or without rings. These are generally used for hand-drawn drapes or tie-tab drapes, and are available in several distinct finishes.
- Wide curtain rods are mainly used for corner and bay windows because the corner straps make these suitable for this kind of window. They attach at both top and bottom.
- Narrow curtain rods are usually used where the drape fabric is quite sheer. Picking a rod which is very clear or translucent is a good idea for them.
Installation curtain sticks
First and foremost, choose whether you want to mount the curtain rod on the window frame or the wall. On consideration this is that frequently frames are made from pine or alternative high quality woods, and you might not want to drill to them. Plaster or sheetrock walls are extremely easy to patch if you alter decor later. To determine the appropriate positioning hold up the rod to the wall with a very long carpenters amount over the rod to be certain you have the rod degree. Also mark the positioning of the mounts on the wall or frame with a pencil. When doing this, you might want the drapes mounted on the rod, if there’s a question regarding how they will appear, or their dangling span. Normally the mounts are put three to six inches past the edge of the window. Then drill holes across the pencil marks to affix the anchors throughout the bracket, making quite certain you’re utilizing the appropriate bit size. Finally, position the curtain sticks into the mounts. If the rod is a bit longer, you might need to install a centre bracket to support the rod and the drapes, to avoid sagging. You need to make sure you utilize wall fasteners which will properly support the weight of all the rods and drapes. Most fasteners will specify the weight that they can safely support. The final step in installing curtain rods would be to fix the brackets and sticks before dressing the windows with drapes, draperies or valances.