kmart curtains and drapes – If you’ve got a shower over a bath tub then you need a shower curtain to prevent the entire bathroom getting wet when you take a shower. Purchase a shower curtain in a design you prefer and which fits the style of your bathroom – often shower curtains are the largest colored surface in this little room – therefore it’s important to get it all right. Once you get your own shower curtain house, here’s how to hang it properly
1. Lay out the Shower Curtain
Open the bundle and lay the shower curtain out fully on the ground. Shower curtains often have two components (that you can purchase separately). You may have an outer non-waterproof coating and an inner waterproof liner or you may just have a single waterproof curtain.
2. Line Up the Eyelets
If you’ve got an outer and inner curtain both may have eyelets at the top. If you’ve got two components then lay out the liner first. When there’s a wrong side and a right side then have the right side facing the ground. Then lay the outer curtain on top with the eyelets at the same end and with the right side facing outwards. That way you will see the best side on the lining when you are in the shower and the ideal side of the curtain whenever you’re in the bathroom!
If you’ve bought shower curtains and lining separately along with the eyelets do not match you up may be better hanging the drapes separately and utilizing a double (dual track) shower rod or rail.
If you’ve got a single waterproof curtain then simply lay it out on the ground.
3. Insert the Rings
Insert these into each eyelet.
4. Hang over the Bathtub
Put the curtain rings on the shower curtain rod or rail that ought to be installed according to the manufacturer’s directions. (You do not want the entire thing coming down on you in mid-shower).
The inner liner or solitary shower curtain needs to be set within the tub as you shower to avoid water leaking on the ground.
5. Following Your Shower
As soon as you’ve showered open the drapes fully – yank them as much as they scale throughout the duration of the rod or rail so they have a opportunity to dry – this will help prevent mould.
Originally posted 2017-05-16 19:12:23.