magnetic holdbacks for curtains

107 views

magnetic-holdbacks-for-curtains magnetic holdbacks for curtains

magnetic holdbacks for curtains – When it comes to home decorating, curtain rods are just as significant of a factor as the curtain cloth. Curtain rods are available in a number of contemporary, elegant and sleek designs and colours with decorative styles and knobs which could be matched to match any type of decor and furniture.

The very first thing to do, and the most critical, in regards to hanging drapes or making rods, is to make certain you make precise measurements. You should measure the diameter of the windows, allowing for a few added inches on either side. Curtain rods can be made from several materials, such as PVC, steel, wood or aluminum. You can buy various ornaments and decorative knobs to place at the ends of the pole. You can get these at local hardware stores, or the large box stores such as Home Depot and Lowes. Another creative and crafty idea would be to use kitchen hooks as curtain pole holders.

Types of curtain rods

Whether you’re choosing to make your new curtain rods as a do-it-yourself project, or select from the various styles that can be found on the market, it’s important that you understand which kind of curtain rod you’ll need to match your decor.

  1. One kind, called cafe rods, can be employed with or without rings. These are generally used for hand-drawn drapes or tie-tab drapes, and are available in many different finishes.
  2. Wide curtain rods are mainly employed for bay and corner windows since the corner straps make these convenient for this kind of window.
  3. Sash rods are usually employed for extended curtains on doors and to enable the curtains to hang closer to the glass surface. They attach at both top and bottom.
  4. Narrow curtain rods are usually used where the curtain cloth is quite sheer. Choosing a pole that’s clear or translucent is a good idea for them.

Installation curtain rods

First of all, decide whether you want to mount the curtain pole on the window frame or the wall. On consideration this is that frequently frames are made from pine or alternative high-quality woods, and you may not want to drill into them. Plaster or sheetrock walls are extremely easy to patch should you change decor afterwards. To determine the proper positioning maintain the pole to the wall using a long carpenters amount over the pole to be sure you’ve got the pole degree. (Very much a two-person task!) Also mark the placement of the mounts on the wall or frame using a pencil. When doing so, you may want to have the drapes mounted on the pole, if there is a question about how they will look, or their hanging span. Usually the mounts are placed three to six inches beyond the border of this window. Then drill holes over the pencil marks to affix the anchors throughout the bracket, making quite sure you’re utilizing the proper bit size. Finally, position the curtain rods into the mounts. If the pole is somewhat longer, you may need to install a centre bracket to support the pole and the drapes, to avoid sagging. You want to be certain you use wall fasteners which will correctly support the weight of all the rods and drapes. Most fasteners will define the weight they can safely support. The final step in installing curtain rods would be to repair the rods and brackets before dressing the windows with drapes, draperies or valances.

Originally posted 2017-03-16 13:02:04.

Leave a reply "magnetic holdbacks for curtains"

Author: 
    author