pressure curtain rods – Purchase a shower curtain in a style you like and which matches the type of your toilet – frequently shower curtains are the largest colored surface in this little room – therefore it is very important to get it all right. Once you get your shower curtain home, here’s how to hang it properly
Open up the package and put the shower curtain out fully on the ground. Shower curtains often have two parts (which you can buy individually). You can have an outer non-waterproof layer and an inner waterproof liner or perhaps you just have one watertight curtain.
If you have an outer and inner curtain both may have eyelets at the top. If you have two parts then put out the liner first. If there’s a wrong side and a right side subsequently have the right side facing the ground. Then put the outer curtain on top together with the eyelets in the same finish and with the right side facing outwards. This way you can see the best side on the lining when you’re in the shower and the best side of the curtain when you are in the bathroom!
If you have purchased shower curtains and lining separately and the eyelets do not match up you will be better hanging the drapes separately and utilizing a double (dual track) shower rod or rail.
If you have one watertight curtain then simply lay it out on the ground.
3. Add the Rings
Insert one of these into each eyelet.
4. Hang over the Bathtub
Place the curtain rings on the shower curtain pole or rail that ought to be installed according to the manufacturer’s instructions. (You do not want the whole thing coming down on you in mid-shower).
The interior liner or solitary shower curtain needs to be set within the bathtub as you shower to avoid water dripping onto the ground.
5. Following Your Shower
As soon as you have showered open up the drapes completely – yank them as much as they scale across the length of the pole or rail so they have a chance to dry – this can help prevent mildew.
Originally posted 2017-04-25 08:30:10.