shower curtain liner for shower stall – Buy a shower curtain in a style you prefer and which matches the type of your toilet – often shower curtains are the biggest colored surface in this small room – therefore it is important to get it right. As Soon as You get your own shower curtain house, here is how to hang it properly
Open the package and lay the shower curtain out entirely on the ground. Shower curtains often have two components (that you may buy separately). You may have an outer non-waterproof coating and an inner waterproof liner or perhaps you just have one watertight curtain.
2. Line Up the Eyelets
If you’ve got an outer and inner curtain both will have eyelets at the top. If you’ve got two components then lay out the liner first. If there’s a wrong side and a ideal side subsequently have the ideal side facing the ground. Then lay the outer curtain on top together with the eyelets in the same finish and with the ideal side facing outwards. This way you will see that the best side on the lining whenever you’re in the shower and the best side of the curtain whenever you’re in the restroom!
If you’ve bought shower curtains and lining separately along with the eyelets do not match you up will be better hanging the curtains separately and using a double (double track) shower rod or rail.
If you’ve got one watertight curtain then just lay it out on the ground.
3. Add the Rings
You’ll need as many shower curtain rings since there are eyelets in the curtains. Insert one of these into every eyelet.
4. Hang over the Bathtub
Put the curtain rings onto the shower curtain rod or rail that ought to be installed in accordance with the manufacturer’s directions. (You do not want the whole thing coming down on you in mid-shower).
The interior liner or solitary shower curtain should be placed inside the bathtub as you shower to avoid water leaking onto the ground. The outside curtain (if you have one) should be arranged away from the bath tub.
5. Following Your Shower
After you’ve showered open the curtains completely – yank them as far as they scale across the length of the rod or rail so they have a chance to dry – this will help prevent mildew.
Originally posted 2017-05-23 06:13:13.